| 80 Litres Capacity ZXGP incubators offer an economical incubation method to a variety of micro-organism cultures with high uniformed temperature control. The processor of our incubators can store up to 9 programs-18 steps-into a “non-volatile” memory. Programs can be used for running multiple “ramp and soak” cycles up to 99 times. Of course the incubators can also be used as a constant (one) temperature incubator. With a triple wall construction and large volume of water, ZXGP-series water jacketed incubators provide unsurpassed temperature stability and protection against heat loss. The water jacket technology holds the temperature for extended periods of time, which is critical during power failures. Under test conditions, the temperature initially drops at only 1°C per hour, and just 8.5°C in 10 hours, by contrast, on most direct heating models, which comes with 3.4°C and more than 15°C dropping instead. Features ▶ P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode. ▶ Fully programmable through the keyboard (9 programs/18 steps). ▶ Forced-air circulation provides uniformity of ±0.5°C@37°C. ▶ Audible and visible alarm on over temperature. ▶ Password protection against unauthorized access to all settings. ▶ Non-volatile memory retains preset parameters after an accidental power interruption. ▶ Large LCD display for easy parameters setting and fast readout. ▶ Inner glass door provides complete visibility to the chamber. ▶ Standard 2 grids included | 